KE Rotary Harrow

Overview

The KE rotary harrow is superbly suited for soil tillage after the plough and mulch sowing on pre-cultivated soils. The strong frame, one piece rotor head and shaft and a sprung tine fixing result in a very robust implement. The large clearance between the tines and above the rotor heads ensures the free passage of large amount of straw or clods of soil.

Details

KE Special – the strong lightweight!
The KE Special is the ideal solution for tractors up to 140 hp because it is robust and light at the same time. The KE Special with a working width of 3 m weighs just 850 kg and thus, the whole sowing combination including tooth packer roller and AD pack-top mounted seed drill with its perfectly placed centre of gravity weighs in at a mere 1,900 kg.

KE Super – The strong lightweight
The KE Super is the right machine for the demanding requirements of a modern arable farm. Due to its sturdy design, it is fine-tuned against hard permanent stresses. For tractors up to 180 hp, the KE Super is the right rotary harrow for a punchy sowing combination

Accessories

Broad roller spectrum
For areas with ligher soils and for smaller tractors, the light-weight cage roller is available. With the tooth packer roller, an even soil reconsolidation across the full working width is achieved. Wedge ring rollers provide reconsolidation in strips. This are the best pre-conditions for an even growth of the volunteer grain.
The Cracker-Disc- roller improves the structure on very heavy soils and leaves a fine crumbled seedbed.

Cage roller
+ Economical
+ Consolidation with depth effect
+ Good for preparatory work for planters or for deep sowing
SW cage roller: 420 mm diamater, 2.50 and 3.00 m working width
SW cage roller: 520 mm diamter, 3.00, 3.50, 4.00, 5.00 and 6.00 working width

Tooth packer roller
+ Consolidation is comprehensive over the entire surface
+ Runs blockage free, even on sticky soils and where there is a lot of straw
+ Scrapers fitted as standard, wear-resistant thanks to hard metal coating (3 to 5 times longer service life in comparison to non-coated)
+ Low set scrapers ensure a smooth surface ven on wet ground
PW tooth packer roller: 420 mm diameter,  2,50, 3.00, 3.50 and 4.00 m working width
PW tooth packer roller: 500 mm diameter,  2.50, 3.00, 3.50, 4.00, 5.00 and 6,00 m working width
PW tooth packer roller: 600 mm diameter,  3.00, 3.50, 4.00 and 6.00 m working width

Wedge ring roller
+ Universal for all soils and conditions
+ The seed is sown in the reconsolidated strips by the coulter following behind
+ Even where the soil is heavy, sufficient loose earth remains available to provide the seed with Optimum cover
+ Excellent suitability in any weather, wet or dry
KW wedge ring roller: 520 mm diameter with 2.50 and 3.00 m working width
KW wedge ring roller: 580 mm diameter with 3.00, 3.50, 4.00, 5.00 and 6.00 m working width 3

KX Rotary Cultivator 

Overview

With the KX rotary cultivator, in a 3 m working width and for tractors in the 190 HP class, a very flexible, usable PTO-driven soil tillage implement now exists that can be used as a rotary cultivator or as a rotary harrow.

Many farmers want to use a flexible machine for differing soil and operating conditions. That means, for example, a rotary cultivator with their ”on-grip” tines for relatively heavy soils when mulch sowing and a rotary harrow with tines set to trailing mode on lighter, stony soils, so that the stones are pressed back down into the soil. Previously, the tines have often simply been turned from ”trailing” to ”on-grip”. The finished result can then often be unsatisfactory, because only tines specially designed for each specific purpose can produce the best work.

Details

”On-grip” tines, ”trailing” tines
The proven tine quick-change system enables the KX to be converted without tools and in next to no time into a specialist machine which is suited to the particular ground conditions.
On both the rotary harrow and the rotary cultivator, the tines are simply pushed into sockets on the tine carriers and secured by pin and lynch pin. With the rotary cultivator tines, the KX can be switched to the ”on-grip” tine position, when heavy soil conditions are encountered.  The ”on-grip” position has proved itself the most ideal for mulch sowing, as an intensive mix of soil and organic residues is ensured.
(1) Tines ”on grip”
(2) Tines in the ”trailing” mode

Quick tine change system:
The tines are simply pushed into the sockets of the tine carrier and secured with a lynch pin. It couldn’t be easier or quicker as there are no tine fixing bolts that require retightening. Even converting tine operation from ”on-grip” to trailing mode is quick and simple. The tines, which are forged from special hardened steel, are elastic and wear-resistant.

The ”Long-Life-Drive” System
The name “Long-Life-Drive” stands for the quality that predetermines the reduced wear, perfect smooth running and high longevity of the entire drive line at rotary cultivators and rotary harrows from Amazone.
The “Long-Life-Drive” includes  the high capacity of the gearboxes, the over-dimensioned and at the same time precisely machined teeth on the spur gears, as well as the accurate manufacture and matching of shafts and bearing bushings come together to offer the ultimate in reliability. Moreover, shafts and tine carriers are bomb proof due to being forged from one piece and the dual, labyrinth sealing system prevent the ingress of crop residues into the drive system. In addition – with the Quick+Safe system – the machines feature a quick tine change and an integrated stone release.

KG Rotary Cultivator

Overview

The KG rotary cultivator incorporates all the design features of the rotary harrow but has an even thicker skinned trough, bigger diameter shafts and stronger tines. AMAZONE rotary cultivators are equipped with the proven ”On Grip” tines to pull themselves into work and automatically maintain the desired working depth. Also in dry and firm fields the rotary cultivator breaks up the soil without any problems and simultaneously intensively incorporates the straw. The large clearance between the tines and above the rotor heads ensures the free passage of trash and soil mixture.

Details

KG Super rotary cultivator – the ”muscle man”
The KG Super with working widths of 3.0 m, 3.5 m or 4.0 m and a new high capacity gearbox for tractor Outputs of up to 300 hp.
The KG Super has reinforced tines as standard and can be ordered with hydraulic depth adjustment and oil cooler as options.

KG Special –rotary cultivator – the allrounder
The high-output KG Special with working widths of 3 m, 3.5 m or 4 m for tractors up to 220 hp.

Folding rotary cultivator with 4 m, 5 m or 6 m working width
The 4.0 m, 5.0 m and 6.0 m working width rotary cultivators fold hydraulically to a transport width of 3.0 m and are suitable for tractors up to 220 kW (300 HP).
The main gearbox of the folding rotary cultivator is equipped with 3-speed lever change for rapid adjustment of the tine speed to different soils and working intensities.

The compact design of the particularly robust folding rotary cultivator allows high output use even in smaller fields.

Accessories

Broad roller spectrum
For areas with ligher soils and for smaller tractors, the light-weight cage roller is available. With the tooth packer roller, an even soil reconsolidation across the full working width is achieved. Wedge ring rollers provide reconsolidation in strips. This are the best pre-conditions for an even growth of the volunteer grain.
The Cracker-Disc- roller improves the structure on very heavy soils and leaves a fine crumbled seedbed.

Cage roller
+ Economical
+ Consolidation with depth effect
+ Good for preparatory work for planters or for deep sowing
SW cage roller: 420 mm diamater, 2.50 and 3.00 m working width
SW cage roller: 520 mm diamter, 3.00, 3.50, 4.00, 5.00 and 6.00 working width

Tooth packer roller
+ Consolidation is comprehensive over the entire surface
+ Runs blockage free, even on sticky soils and where there is a lot of straw
+ Scrapers fitted as standard, wear-resistant thanks to hard metal coating (3 to 5 times longer service life in comparison to non-coated)
+ Low set scrapers ensure a smooth surface ven on wet ground
PW tooth packer roller: 420 mm diameter,  2,50, 3.00, 3.50 and 4.00 m working width
PW tooth packer roller: 500 mm diameter,  2.50, 3.00, 3.50, 4.00, 5.00 and 6,00 m working width
PW tooth packer roller: 600 mm diameter,  3.00, 3.50, 4.00 and 6.00 m working width

Wedge ring roller
+ Universal for all soils and conditions
+ The seed is sown in the reconsolidated strips by the coulter following behind
+ Even where the soil is heavy, sufficient loose earth remains available to provide the seed with Optimum cover
+ Excellent suitability in any weather, wet or dry
KW wedge ring roller: 520 mm diameter with 2.50 and 3.00 m working width
KW wedge ring roller: 580 mm diameter with 3.00, 3.50, 4.00, 5.00 and 6.00 m working width

 

TL Deep Loosener 

Overview

The compact designed, close coupled TL deep loosener offers the possibility of the optimum cultivation technique without prior ploughing even in heavy trash condition. Wide wing shears and a large clearance between the legs allow a blockage free operation. The deep loosener is available with 3 m working width and operates with a working depth of 15 up to 25 cm in combination with rotary cultivator, packer roller and Pack Top seed drill with RoTeC roll disc coulters.

Details

Winged tines
Depending on the soil conditions 600 mm wide winged tines are available in addition to the as standard supplied 300 mm.