GLENMORE VIA WATERFORD

+353 51 880144

DUBLIN ROAD KILKENNY

+353 51 880699

12 METRES FOR MAXIMUM DAILY OUTPUTS

The EFECTA CE seed drill has a working width of 12 metres. In its category, it is an extremely versatile seed drill, equipped with double-chamber pressurised hopper with a capacity of 6,000 litres. It can be equipped with four types of front equipment installed in front of the drill coulters. The large working width in combination with a high working speed guarantees achieving high daily output

#                   #                       #

12-12m                         300-450hp                           6000L

 

 

 

UP TO 20 HECTARES PER HOUR

A wide working width seed drill designed for maximum daily outputs.

EFECTA CE is an extremely versatile seed drill with a working width of 12 metres and exceptionally low demands for the tractor power. That provides high working speed and effectiveness of the whole set. The EFECTA CE wide working width seed drill can seed up to 20 ha/h. Even with this hourly output, EFECTA CE can establish crops with high seeding

AN EXTREMELY VERSATILE SEED DRILL

Place fertiliser or seed different seeds in a single pass.

Seeding together with fertiliser placement

The double-chamber version of the pressurised hopper enables seeding the crop together with row fertiliser placement in one pass, or mixing seeds with fertiliser in the metering piping. The fertiliser dosing and the selected seeding amount are completely independent of one another.

Seeding several types of crop

The EFECTA CE wide working width seed drill can also be used for establishing several types of crop. One chamber can be filled with the main crop seeds, the other chamber with the companion crop seeds. This structural design makes it possible to seed two crops together, bringing new agronomic opportunities in response to the current farming requirements. The seeding amount of the crops can be set individually.

Seeding one crop

To use the performance potential, both chambers can be used for one type of seed. It will reduce the time needed for refilling the hopper and increase the efficiency of the EFECTA CE wide working width seed drill.

FOUR TYPES OF FRONT WORKING EQUIPMENT

Adjust the seed drill to your farming needs.

Front Crushbar levelling bar

The hydraulically controlled Crushbar levelling bar is especially suitable for the final surface levelling in front of the drill coulters. It is easily controlled using the hydraulic circuit from the comfort of the cabin.

PROFI coulters

PROFI coulters are specially shaped, hydraulically controlled discs. They enable the operator to quickly respond to the current conditions. It is important seed drill equipment for heavier soils.

TURBO coulters

TURBO coulters are sharp discs mounted behind the disc section. The coulters work in the same line as the rear drill coulters. It is important seed drill equipment when seeding directly into a stubble field, or in the catch crop.

FERTI coulters

FERTI coulter are used for fertiliser application. The fertiliser placement depth is adjustable independently of the seed placement depth. The coulters are designed with a spacing of 12,5/16,7 cm for a high throughput.

A SMART SEED DRILL

With the precision farming function.

Sectional control

Automatic switching of the individual sections based on a GPS signal. EFECTA CE has four sections, each three metres wide.

Variable batching

Variable placement of seeds and fertiliser (adjustment according to the seeding amount and dosage) based on the regulatory maps according to the machine position.

Data transfer

Two-way data transmission from PC to the screen terminal (seeded area, seeded amount and other data).

Setting the seeding amount

The required seeding dose can be entered in kg/ha or in units per m2 (in this case, seed HTS and germination capacity also have to be entered).

Adjustable delay

Allows setting the machine so that the seeds are in the drill coulters at the right time when starting, or lowering or lifting the machine into the working or headland position.

FOUR DISTRIBUTION HEADS

Even high-quantity application.

EFECTA CE is equipped with four distribution heads for even distribution of seed / fertiliser to the individual drill coulters and for the ability to apply high doses of fertiliser and seeds. That ensures the same distance to all drill coulters from the distribution head. This solution also offers a sectional control by every three metres of the working width

WELL-ESTABLISHED USE OF PARALLEL LINKAGE

For drill coulters and seed bar sections.

The drill coulter sections are mounted on the side frames via parallel linkage and each drill coulter has its own parallel linkage within the proven PSP system. The combination of such mounting provides perfect terrain contouring and maintaining a constant depth of seeding along the entire working width.

TWO ROW SPACING OPTIONS

12.5 or 16.7 centimetres.

The EFECTA CE wide working width seed drill can be equipped, as standard, with drill coulters with an row spacing of 12.5 cm suitable for cropping systems with a high ratio of cereals in the crop rotation. The row spacing of 16.7 cm is suitable for seeding with large quantities of crop residues on the surface.

EXCELLENT SEED PLACEMENT

Precisely designed drill coulter.

The double-disc seed coulter with an offset disc cuts crop residues and creates a clean and prepared groove for even seed placement. There is either a standard, or carbide scraper between two coulters. The seeds are then covered with fine soil and pressed down into the soil by the depth wheel. The depth wheel is available in two sizes: 330×50 mm and 330×65 mm

FLOW SENSORS

Keep track of the throughput of each drill coulter.

The seed drill can be equipped with flow sensors on request. The device ensures that if a drill coulter gets clogged, the information is displayed on the screen. That guarantees maximum seeding accuracy.

SAFE TRANSPORT

The seed drill meets the E.U. requirements.

Even though the EFECTA CE seed drill has a working width of 12 metres, its transport on roads is easy and safe. The side frames of the seed drill fold forward and the transport length is only 7.8 metres. The wide arrangement of the transport wheels provides a good stability, even at higher speed. The compact dimensions also contribute to easy and fast turning at headland.

FAST, SAFE AND EASY

Double-chamber hopper filling.

The fast and comfortable filling of the EFECTA CE hopper is ensured by an easily accessible and wide platform with railing and steps. To fill the hopper, the steel lid swings by 90°. The hopper filling level is indicated by two sensors. One is installed higher and its angle is adjustable, the other one is installed in the lower third of the hopper.

COMFORTABLE CALIBRATION

With the FARM LINK mobile application.

BEDNAR developers designed an application for mobile phones that provides easy and simple calibration of the seed drill from your mobile phone. The mobile application includes a guide that helps with the right selection of the seed metering roller based on the type of seeds/fertiliser, working speed and seeding amount.