A MOUNTED SEEDBED CULTIVATOR SUITABLE FOR SMALL HOLDERS
Thanks to its low traction requirements, the SWIFTER SN mounted seedbed cultivator is suitable for connection with lower-powered tractors, which are often used by smaller farmers. The working width of these cultivators is 3 to 5 meters, depending on the model selected. The effective combination of working parts ensures intensive leveling, mixing, breaking up clods, and final smoothing of the tilled soil. In a single pass, you can perfectly prepare the seed bed and thus reduce overall costs.
2-12 cm 3-5 m 100-200 hp
UP TO 7 OPERATIONS IN ONE PASS
Formation of a seedbed to ensure proper and uniform crop emergence.
Combining several operations into one means fewer passes through the field and lower costs of seedbed preparation. The front levelling bar perfectly levels any unevenness. The front roller crumbles the clods. The tine section undercuts, aerates and warms up the soil layer. The final clod crumbling is provided by various types of rollers in combination with other equipment behind the rollers.
EXCHANGEABLE WORKING SECTIONS
Adjusting seedbed preparation to the needs of the crop.
SHARE SECTION
This working section is suitable for summer and autumn preparation, when the soil needs to be loosened, cut and mixed after the previous harvest. The 270 mm arrow-shaped shares in 2 rows with overlap ensure that the soil profile is cut across the entire working width of the machine, creating a firm bottom. At the same time, the working angle of the shares aggressively processes the soil, creating a loosened top layer. Each share is mounted on a flexible tine, which allows for a “3D effect” (horizontal and vertical movement) that protects the share from damage.
SB SECTION
This section is particularly suitable for spring preparation before of planting sugar beet, when it is necessary to manage spring moisture adequately, but still create a precise seed bed. The angle of the share does not cause vertical mixing of the soil, but thanks to the use of overlapping shares with a working width of 170 mm, the necessary full-area undercutting of the soil is achieved. Another benefit is the reduction in the power requirement of the towing vehicle.
GAMMA SECTION
This section is suitable for early spring operations, such as before of seeding barley. Four rows of gamma points at a negative angle aerate and warm the soil without bringing wet particles to the surface, thus preserving winter moisture. This is important for the rapid start of spring growth. The suspension of each tine allows for high-speed operation. Gamma points for this section are also available in a LONG LIFE version.
WORKING DEPTH ADJUSTMENT
Mechanical or easy hydraulic adjustment.
Even the smallest models of the SWIFTER SN mounted seedbed cultivators are easily controllable. You can choose from mechanical adjustment of the working depth, or comfortable hydraulic adjustment.
FOLDING FRAME
For models with a working width of 4 and 5 metres.
The working width of the machine is a limiting factor for transportation on roads in the European Union. Therefore, the SWIFTER SN 4000 and 5000 are manufactured in the folding version to ensure safe transport. The centre of gravity of the cultivator is moved as close to the tractor hitch as possible, so the set is stable even at high transport speed.
