GLENMORE VIA WATERFORD

+353 51 880144

DUBLIN ROAD KILKENNY

+353 51 880699

A WIDE WORKING WIDTH SEEDBED CULTIVATOR DESIGNED FOR HIGH DAILY OUTPUTS

SWIFTER SE is a wide working width seedbed cultivator designed for high daily outputs thanks to the working width of 8 to 12 metres. Like any other BEDNAR seedbed cultivators, the SWIFTER SE product line has exchangeable working sections to meet the requirements of seedbed preparation for a specific crop. Including the combination of up to eight operations in one pass. An advantage of the SWIFTER SE is the independent suspension of the working sections for perfect terrain contouring. Safe transport of the machine, even with the width of 12 metres, is ensured by folding the side frames forward to the drawbar.

#          #          #

  2-12 cm                 8-12 m                220-380 hp

UP TO 8 OPERATIONS IN ONE PASS

Creating a seedbed for proper and even crop emergence.

Combining several operations into one means fewer passes through the field and lower costs of seedbed preparation. The front levelling bar or leveller perfectly levels off any unevenness. The front crumbling roller crumbles the clods. The tine section undercuts, aerates and warms up the soil layer. The final clod crumbling is provided by various types of rollers in combination with other equipment behind the rollers.

EXCHANGEABLE WORKING SECTIONS

Adjusting seedbed preparation to the needs of the crop.

A share section

This working section can be used for summer and autumn preparation when soil needs to be loosened, undercut and mixed after the previous harvest. The 270 mm shares in two overlapping rows undercut the soil profile along the entire machine working width, creating a firm bottom. At the same time, soil is aggressively processed thanks to the working angle of the shares, creating a loosening top layer. Each share is mounted on a flexible tine that provides a 3D effect (horizontal and vertical movement) which protects the share from damage.

SB section

The section is especially suitable for spring cultivation before of planting sugar beet where it is required to adequately manage spring moisture, but still prepare a precise seedbed. The share angle does not mix soil vertically, but the soil is still undercut in the whole area thanks to the overlapping shares that are 170 mm wide. Another benefit is the reduced demand on the towing vehicle power.

Gamma section

This section is suitable for early spring operations, such as before of seeding barley. The four rows of gamma points at a negative angle aerate and warm up soil without bringing wet particles to the surface, which preserves winter moisture. It is important for a fast start of growth of spring crop. The spring-loading of each tine enables working at high speed. The gamma points for this section are also available in the LONG LIFE version.

WAVE-FLEX SYSTEM

Maintains even cultivation depth along the entire machine working width.

The Wave-Flex system means that the individual sections (width of 2 or 3 metres) are independently suspended on the side frames using the towing arms in the front and contouring arms in the rear. The system helps maintain the set working depth. The soil profile is evenly cultivated along the entire working width.

PROVEN DESIGN

Do not lose time, work at headland without lifting the machine.

The design of the SWIFTER SE cultivator enables turning the machine at headland without lifting the working sections. Even so, we recommend turning on the headland with slightly excavated working sections and a larger turning radius. The telescopic connecting rods stabilise the side frames not only when turning, but also at higher working speed.

FORWARD FOLDING OF SIDE FRAMES

Smart folding for safe transport.

The SWIFTER SE wide working width cultivator can be easily folded into the transport position from the tractor cabin. The fully hydraulic folding of the working sections forward to the drawbar provides compact transport dimensions of up to 3 metres of transport width, required for transport on roads in EU countries.

INTEGRATED TRANSPORT AXLE TRACK ERADICATORS

Precise loosening of hardened soil.

The wide working width SWIFTER SE seedbed cultivators with a working width from 8 to 12 can be equipped with tractor track eradicators – either fixed, or telescopic. The SE 10000 and SE 12000 models can now be equipped with the transport axle track eradicators.

THIRD CROSSKILL ROLLER

For maximum work quality.

The SWIFTER SE 10000 cultivator can be equipped with a third crosskill roller on request. The last crosskill roller has a diameter of 350 mm and creates the perfect soil structure, namely in difficult conditions, such as dry summer months.